Sprayable Aliphatic Polyurea Coating Supplier in China
Sprayable Aliphatic  Polyurea Coating paint coating manufacture Shenzhen China  
Home About Us Products Contact Us



Honest Joy Coating & Paint
Polyurea Coating
Aliphatic Polyurea
Brushable Polyurea
Sprayable Aliphatic Polyurea Coating
Polyurea Roof Coating Primer
Elastomeric Polyurea Binder for Joints, Nosing and Spall Repair Binder Polyurea
Pure Polyurea Elastomer coating
Sprayable Aliphatic Polyurea Coating
High Performance Polyurea Urethane Primer
Waterproof Polyurea Elastomer

sprayable aliphatic polyurea coating

Aliphatic Sprayable Polyurea Coating is a two component sprayable aliphatic polyurea. It dries in seconds to provide a tough chemical and abrasion resistant coating. As an aliphatic polyurea, Aliphatic Sprayable Polyurea Coating is color fast and will resist yellowing from Ultra violet light exposure. Typical working times of one minute or less can be expected. This fast reaction requires a fast, efficient mixing technique so that the mixture can be applied within the short gel times. Impingement mixing from available two-component spray machinery is efficient and entirely adequate. Aliphatic Sprayable Polyurea Coating is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities.

Fast cure. Can be mixed and put in service within 2 hours.

chemical and uv resistant.

刷流水赚钱是真的吗100% solids. two-component, low shrinkage.

刷流水赚钱是真的吗excellent physical properties including high adhesion, tensile strength and abrasion resistance.

刷流水赚钱是真的吗high thermal stability at temperatures up to 250 f.

Steel Surfaces – Prepare in accordance with Surface Preparation SSPC-SP6 to SP10 near-white metal blast cleaning. All work blasted should be coated the same day.
New concrete - Remove laitance by acid etching, abrasive blasting or water blasting. Old concrete - abrasive blast or water blast to remove laitance and contamination. Spray apply one coat of HJ-80 Polyurea Primer to prevent pinholes Polyurea – Less than three days old solvent wipe and apply Aliphatic Sprayable Polyurea Coating ; if more than 3 days old roughen surface with abrasive sanding. Solvent Wipe with Acetone or MEK and apply Project Conditions: Surface must be structurally sound, dry, and uncontaminated. Concrete must be free of voids, bugholes, honeycombs and delaminations.
For large volumes, a high-pressure proportioner with heated lines and an external impingement mix, two-component spray gun may be used. Aliphatic Sprayable Polyurea Coating can be applied at temperatures from 35oF to 1oF.
Best spray pressure is 00 to 3000 psi; hydraulic pressure at

刷流水赚钱是真的吗400 - 550 psi. materials are heated to 140 – 160° f for spraying. the use of conventional static mix or plural-component internal-mix spray equipment is not recommended. thickness can be built to most specifications in one application. best spraying practice is with gun 2 ft. from surface and perpendicular to surface. edges left overnight should be roughened and primed before overlapping.


mix ratio

刷流水赚钱是真的吗by volume 1a to 1b

drying properties @ 30 mils wet @ 73 f and 50% rh

gel time, seconds


to touch

3 minutes

to recoat

刷流水赚钱是真的吗3 minutes minimum;16 hours maximum

surface at 1 hour

tack free

刷流水赚钱是真的吗full cure

24 hours

刷流水赚钱是真的吗elongation, %


tear strength

500 pli

shore d hardness


刷流水赚钱是真的吗tensile strength, psi


remains flexible in temperature range of

刷流水赚钱是真的吗-45of to 0of

flash point, components

>0 f

刷流水赚钱是真的吗gardner impact

direct and indirect >160 in-lbs

moisture vapor transmission astm e 96

0.025 perm

abrasion resistance (wt. loss mg) astm d 4060

刷流水赚钱是真的吗1000g 1000 rev cs-17 6 mg.


white, black, light gray, dark gray, beige, brick red,

bond strength


350 psi


1,500 psi


450 psi

PACKAGING: 刷流水赚钱是真的吗Aliphatic Sprayable Polyurea Coating is packaged as a 100 gallon unit.

Aliphatic Sprayable Polyurea Coating is an aliphatic based polyurea system. Consult chemical resistant chart for corrosive environment applications. Do not install in hydrostatic or moisture/vapor conditions. SHELF LIFE: Six months minimum when stored at 75°F and dry conditions. Aliphatic Sprayable Polyurea Coating, like most construction materials, must be stored in a dry, well protected and suitable storage environment. Keep containers sealed. CAUTION: Contains aliphatic isocyanates. Avoid breathing vapors. Avoid contact with skin and eyes. Do not ingest. Keep away from foodstuffs and wash thoroughly before smoking or eating. Should skin contact occur, wash skin well with soap and water. Should eye contact occur, flush thoroughly for at least 15 minutes with water. Get medical attention.

Contact Us
Honest Joy Coating & Paint. All rights reserved.
????????? ????5????app 3d?????? 2019???????? ?????????